Phoenix Contact 4-Position Flush Connector, 0.5 mm, 2.3m, IP67, 250V, 4A, SCO

Caution: Avoid plugging in or disconnecting connectors under load. Improper use may cause damage. Ensure products are functioning properly and inspect regularly. Only qualified electrical personnel should install and operate. Familiarize with electrical engineering basics and safety notes. Suitable for plant, controller, and electrical device engineering. Protect against environmental influences in outdoor applications. Do not manipulate or improperly open assembled products. Use specified mating connectors. User responsible for third-party manufacturer connections. Ground conductive connector housings for voltages > 50 V AC. Limit tensile load on connectors. Observe technical data found on product, packing label, documentation, or online. Use recommended tools. Protect unused connectors with caps. Ensure proper ground connection. Follow VDE and DIN EN standards for combining circuits. Connector may warm up in normal operation; user responsible for warnings. Four positions, 'A' coding, II overvoltage category, 2.5 kV AC surge voltage, 250 V nominal voltage, 4 A nominal current, cable connection, 2.3 m cable length, 0.5 mm cable cross-section, IP67 (when plugged in) degree of protection, -25C to 85C operating temperature, IEC 61076-2-101 standards, rear mounting (M16 x 1.5), 1422636 item number, 1 pc packing unit, 10 pc minimum order quantity, ABQYAA product key, 4055626311722 GTIN, 138.6 g weight per piece (including/excluding packing), DE country of origin, UNSPSC 21.0, 39121413, EFUP-50 environment friendly use period, no China RoHS declaration table required, no REACH candidate substance above 0.1 wt%.